Vertical Communications Scout II - Manual (Page 22)

•
To enable the Tracker pager at your station,
1. Lift handset and listen for intercom dial tone.
2. Dial ✳ 06.
3. Hang up handset.
• To disable the Tracker pager at your station,
1. Lift handset and listen for intercom dial tone.
2. Dial # 06.
3. Hang up handset.
•
To send a call-back message to someone’s Tracker Pager after
receiving a ring-no-answer,
1. Make an intercom call to someone and receive no answer.
2. Dial #01.
3. After your station returns to idle* hang up handset. The
Pager—Tracker system will transmit your station extension
number to called party’s Tracker Pager display. (Some models will
also display your station name if the system is programmed to
include station names.)
•
To park a call and have Tracker Pager tell someone
to retrieve the call,
1. Answer call and press TRANSFER/CONFERENCE,
2. Dial extension number and hear ringback.
3. Dial # 01,
4. Hang up handset to end. The Tracker paging system will transmit
orbit dialing code and caller ID information, if available, to called
party’s Tracker Pager display. (Alpha/numeric models display #91
through #99 while numeric-only models display -91 through -99.)
* If the Tracker paging system does not accept your action, an error tone
will sound back at your telephone.
Using The Other Telephone Features GCA70–246
7 – 2 Single Line Station User's Guide