Vertical Communications Scout II - Manual (Page 29)

Programming
Your Telephone
9.1 Storing Speed Dial Numbers
• To store an outside number as a speed dial number,
1. Lift handset and listen for intercom dial tone.
2. Dial ✳ ✳ 1.
3. Dial 0–9 to choose storage location.
4. Dial 1–4 to select line groups 1–4, or dial 0 to let system select
line.
5. Dial number to be stored (up to 16 digits long—include ✳ and
# if needed). To store hookflash in a number sequence, press
TAP; press HOLD to store pause (only if needed).
6. Press TRANSFER/CONFERENCE to store number.
7. To store another number, repeat steps 3 through 6.
8. Repeat previous steps until all numbers are stored.
9. Hang up handset to end.
NOTE: The Federal Communications Commission (FCC) requires
that when programming emergency numbers and making test
calls to emergency numbers, you do the following: (1) Remain
on the line and briefly explain to the dispatcher the reason for
the call; (2) always make such a test call during the off-peak
hours, such as early morning or late evening.
9
GCA70–246 Programming Your Telephone
Single Line Telephone Station User's Guide 9 – 1