Vertical Communications Scout II - Manual (Page 23)

•
To respond when your Tracker Pager displays park orbit dialing
code,
1. From any system station, press INTERCOM.
2. Dial displayed orbit code (# 91–99).
3. Retrieve call.
7.3 Pulse/tone Switching
If the local telephone service is pulse (rotary), convert to tone while
dialing as follows:
press # at point in dialing sequence where conversion to tone is re-
quired.
NOTE: Pulse/Tone switching can be programmed into speed dial
numbers by pressing # during number storage.
7.4 Using Call Forwarding
• To forward personal calls to another telephone,
1. Lift handset. Listen for intercom dial tone.
2. Dial ✳ 05,
3. Dial extension number of station to which calls are to be
forwarded.
• To cancel personal call forward,
1. Lift handset and listen for intercom dial tone.
2. Dial # 05.
•
To forward all calls to another telephone,
1. Lift handset and listen for intercom dial tone.
2. Dial ✳ 5.
3. Dial extension number of station to which calls are to be
forwarded.
GCA70–246 Using The Other Telephone Features
Single Line Station User's Guide 7 – 3