Installing the system in the rack, Figure 1-7, Installing and removing static rail modules – Dell PowerEdge 860 User Manual
Page 17
Advertising
Rack Installation Guide
15
Figure 1-7.
Installing and Removing Static Rail Modules
Installing the System in the Rack
CAUTION:
If you are installing more than one system, install the first system in the lowest
available position in the rack.
CAUTION:
Because of the size and weight of the system, never attempt to install the system in
the mounting rails by yourself.
To install the system on the rack, perform the following procedure:
1 From the front of the system, lift the chassis into position so that the side rails are aligned
with the mounting rails on the rack.
rail modules (2)
shoulder screws (4)
front release latch
J slots (4)
Advertising