Recommended tools and supplies, Rack kit contents, Figure 1-10 – Dell PowerEdge 860 User Manual
Page 21: Two-post rack kit components
Rack Installation Guide
19
Recommended Tools and Supplies
•
#2 Phillips screwdriver
•
3/8-inch wrench or nut driver (if changing bracket to flush-mount configuration)
•
Masking tape or felt-tip pen to mark the mounting holes
Rack Kit Contents
The two-post rack kit includes (see Figure 1-10):
•
One pair of mounting rails
•
12-24 x 0.5-inch pan-head Phillips screws (8)
•
Releasable tie wraps (2) (not shown in Figure 1-10)
Figure 1-10.
Two-Post Rack Kit Components
mounting rails (2)
12-24 x 0.5-inch pan-head
Phillips screws (8)
7.62-cm (3-inch) wide, flush-mount, threaded studs
flush-mount mounting flange
15.24-cm (6-inch) wide, flush-mount, threaded studs
center-mount mounting flange
7.62-cm (3-inch) wide, center-
mount, threaded studs
15.24-cm (6-inch) wide,
center-mount, threaded
studs
adjustable mounting flange