Dell Latitude X300 - Manual (Page 26)

24 S y s t e m I n f o r m a t i o n G u i d e
www
.dell.com | support.dell.com
2 If a problem is encountered during a test, a message appears with an error code and a
description of the problem. Write down the error code and problem description and
follow the instructions on the screen.
If you cannot resolve the error condition, contact Dell.
NOTE: The Service Tag for your computer is located at the top of each test screen. If you
contact Dell, technical support will ask for your Service Tag number.
3 If you run a test from the Custom Test or Symptom Tree option, click the applicable
tab described in the following table for more information.
4 When the tests are complete, close the test screen to return to the Main Menu screen.
To exit the Dell Diagnostics and restart the computer, close the Main Menu screen.
Tab Function
Results Displays the results of the test and any error conditions
encountered.
Errors Displays error conditions encountered, error codes,
and the problem description.
Help Describes the test and may indicate requirements for
running the test.
Configuration Displays your hardware configuration for the selected
device.
The Dell Diagnostics obtains configuration
information for all devices from the system setup
program, memory, and various internal tests, and it
displays the information in the device list in the left
pane of the screen. The device list may not display the
names of all the components installed on your
computer or all devices attached to your computer.
Parameters Allows you to customize the test by changing the test
settings.