Dell PowerEdge R810 - Manual (Page 8)

8
Information Update
Processor Settings Screen
Security Settings Screen
New Post Messages
Option Description
Virtualization
Technology
(Disabled default) Set to Enabled for TXT security feature support.
NOTE:
Disable this feature if your system does not run
virtualization software.
C States
(Enabled default) When set to Enabled for power savings, the processor(s)
can operate in C6 and package C3e states.
Option Description
Intel AES-NI
(Enabled default) Displays status of Advanced Encryption Standard with New
Instructions.
TPM Set to Enabled and Activated for TXT feature support.
Intel TXT
(Disabled default) Enables Trusted Execution Technology for security
improvement.
Message Description
System Memory Size:
XX.X GB, System Memory
Speed: XXXX MHz,
Voltage: 1.5V or 1.35V
Displays the amount of system memory, system memory
speed, and current system memory operating voltage.
TXT error occurred during
POST. TXT has been
disabled due to an error.
The configuration is not setup properly or does not
support the TXT feature.
There was an error during
TXT SINIT ACM
invocation on the previous
boot due to an error
processing the Launch
Control Policy Displays when there is a policy integrity failure in the
trusted boot environment launch control policies.
CPU X Failed Initialization The system BIOS reports a processor with IERR failure
or processor that is present but fails initialization.