Dell Alienware Aurora (Late 2009) - Manual (Page 100)

0100
0100
/
CHAPTER 20: BLUETOOTH ASSEMBLY
2
1
1 Bluetooth assembly 2 thumbscrew
Removing the Bluetooth Assembly
NOTE: The Bluetooth ® assembly is available on your computer only if you
ordered it while purchasing your computer.
Follow the instructions in “Before You Begin” on page 1. 6.
Remove the left side-panel (see “Removing the Left Side-Panel“ on page 2. 11).
Open the PCI shroud (see “Opening the PCI Shroud“ on page 3. 18).
Remove the drive-bay shroud (see “Removing the Drive-Bay Shroud” on 4.
page 19).
Disconnect the Bluetooth assembly cable from the connector on the master
5.
I/O board.
Loosen the thumbscrew that secures the Bluetooth assembly to the
6.
chassis.
Slide and pull the Bluetooth assembly away from the front of the chassis.
7.