Dell PowerEdge 2970 - Manual (Page 9)

Broadcom NetXtreme and NetXtreme II TOE
7
Running Diagnostics in Microsoft Windows
The first time you run the Broadcom diagnostics program on NetXtreme II (5708) devices in a Microsoft
Windows environment, the Windows operating system will automatically install the diagnostics driver
for the program. You may be prompted during the driver installation to specify the directory location
of the driver, bxdiag.inf. Specify the directory where you unzipped the Broadcom driver package.
If the file bxdiag.inf does not exist on your hard drive, you can run the Broadcom Installer setup.exe
from the zip package included on the DSA
Service Mode CD, or from the zip package downloaded from
support.dell.com. Running the installer will place the diagnostic driver on your hard drive and prepare
it for automatic installation for when you run the Broadcom diagnostics program.