Installing the mounting rails in the rack, Installing rapidrails mounting rails – Dell POWEREDGE 2950 User Manual
Page 14
Advertising
12
Rack Installation Guide
Installing the Mounting Rails in the Rack
Installing RapidRails Mounting Rails
NOTE:
Ensure that the rotating mounting brackets on the slide assemblies are in the RapidRail configuration.
See Figure 1-5.
1 At the front of the rack cabinet, position one of the mounting rails so that its mounting-bracket flange
fits between the marks or tape you placed (or numbered locations) on the vertical rails in "Marking the
Rack" on page 9 (see Figure 1-5).
The top mounting hook on the front mounting-bracket flange should enter the top hole between
the marks you made on the vertical rails.
Figure 1-5.
Installing RapidRails Mounting Rails
1
mounting hooks (4)
2
push buttons (2)
3
mounting rails (2)
front of rack
1
2
3
Advertising