Dell PowerEdge M805 - Manual (Page 37)

Configuration Guide
35
To access the Main dialog box:
Press <Print Screen> to launch the OSCAR interface. The Main dialog box
appears.
or
If a password has been assigned, the Password dialog box appears. Type your
password and click OK. The
Main dialog box appears.
Resynchronizing the Server List at the Remote Client Workstation
Once the iKVM module is connected, the blades appear in OSCAR. You now
need to resynchronize the servers on any remote workstation to ensure that
the blades are available to any remote users connected to the console switch
through the Remote Console Switch software.
NOTE:
This procedure only resynchronizes one remote client workstation. With
multiple client workstations, save the resynchronized local database and load it into
the other client workstations to ensure consistency.
To resynchronize the server listing:
1 Click Resync in the Server category of the Management Panel (MP).
The Resync Wizard launches.
2 Click Next.
A warning message displays indicating that the database will be updated to
match the current configuration of the console switch. Your current local
database names will be overridden with the switch names. To include
unpowered SIPs in the resynchronization, click to enable the Include
Offline SIPs checkbox.
3 Click Next.
A Polling Remote Console Switch message box appears with a progress
bar indicating that the switch information is being retrieved.
4 If no changes were detected in the appliance, a completion dialog box
appears with this information.
If server changes were detected, then the Detected Changes dialog box
will be displayed. Click Next to update the database.
U003Cbk0.book Page 35 Wednesday, July 30, 2008 12:19 PM