Cyclades User's Guide - Manual (Page 222)

Configuration
206 AlterPath KVM/net Installation, Administration, and User’s Guide
Any authentication method chosen for the KVM/net is used for
authentication of any users attempting access through telnet, ssh, or
the Web Manager.
See “Authentication” on page 45 for more details.
• To configure all authentication servers for the KVM/net ports.
The administrator fills out one of the tabbed forms to set up an
authentication server for each authentication method to be used by the
KVM/net and by any of its ports: RADIUS, TACACS+, LDAP, Kerberos,
SMB (ports only), NIS. See “Configuring Authentication Servers for
Logins to the KVM/net and Connected Devices” on page 208.
See “To Configure an Authentication Method for KVM/net Logins” on page
206 for instruction on how to specify an authentication method for ports.
T To Configure an Authentication Method for KVM/net Logins
See “Network” on page 226, if needed, for background information.
1. Go to Configuration>KVM>Authentication in Expert mode.
The AuthType form displays, as shown in the following figure.
Figure 4-23:KVM Unit Authentication Configuration Form
2. To specify an authentication method for logins to the KVM/net, select a
method from the Authentication drop-down list.