Crestron electronic Green Light GLPS-HSW-FT - Manual (Page 46)

Crestron Commercial Lighting Design Guide
42
Room Solutions
iLux
iLux ® is a complete, integrated lighting system designed for wall mount installation in boardrooms, auditoriums, theaters, or anywhere
versatile and cost-effective control of lighting and shades is required. iLux CLS-C6 is available with different options, including infiNET
EX wireless communications and motion detection.
x Wall mount integrated lighting and shade control
x 6 channels of dimming or switching
x 6 groups of shade and drape control
x Linkable for up to 54 lighting channels and 54 shade groups
x Up to 16 user-settable scenes
x 7 configurable "rocker" buttons with customizable labels
x Large ON and OFF buttons
x Flip-up front cover reveals setup controls and programming
port
x 6 bargraphs show lighting levels and shade positions
x Easy setup from front panel or iLux Designer software
x Built-in motion detector (-C6M and -C6MEX models only)
x Supports multipoint control using up to 16 keypads
x Optional IR remote
x Master air-gap relay
x Integrates with control systems via Cresnet
x Energy saving ASHRAE 90.1/LEEDS compliant
x Available in almond, black, or white
6 Channel Dimming
Six channels of dimming are available for incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire dimmable fluorescent
loads. On/off switching of many non-dimmable lighting loads is also possible. Each channel will handle up to 800 watts individually,
with a total rating of 1920 watts for the complete unit. Larger loads and additional load types can also be supported using Crestron CLS-
EXP Series expansion modules.
6 Group Shade Control
Using Crestron networked shade and drape controllers, iLux enables versatile control of a roomful of motorized window treatments,
screens or lifts in up to six groups. Simply add a shade and drape controller from the Shades section.
Energy Management
With the addition of Green Light integration modules and light sensors, the iLux line of Integrated lighting systems allow for the
management of room occupancy sensing, daylight harvesting and demand response for maximum energy efficiency and cost savings
(ASHRAE 90.1 and CEC Title 24 compliant). See the Sensors section for more details.
Interface Support
The CLS line of room controllers can support up 2 touch panels and up to 16 keypads without a centralized processor
. Individual buttons
can be programmed to work through the master unit or can target specific slave units for maximum control and room management.
iLux Room Controller (CLS-C6M)