Compaq MP1800 - Manual (Page 30)

2-6 Using the Projector
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 9 Words: 1439 Saved date: 05/17/004:43 PM File Name: Ch02
4. To make a selection from the level 2 menu, press the Minus (-)
button to scroll down the level 2 menu, or press the Plus (+)
button to reverse the scroll direction.
5. Highlight the selection and press the Select button to confirm
the selection. The level 3 menu displays.
6. Level 3 for Position functions display the adjustment scales.
Use the Minus button to decrease and the Plus button to
increase the screen Horizontal and Vertical positions.
✎ Some menu functions display adjustment
scales in the level 2 menu, while others
display adjustment scales in the level 3
menu.
7. After making the adjustment, select Save and Return. To void
any changes made, select Cancel instead of Save and Return.
8. To exit from the on-screen menu, select Exit from the Main
menu. If the display is a second or third-level menu, select Save
and Return
or Cancel, then select Exit from the Main menu.
Explaining Functions in the Analog On-Screen Menu
■ Brightness and Contrast—Adjusts the displayed image
brightness and contrast ranges from 0 to 100.
✎ An example of a standard setting is to set
the contrast level to 67 and the brightness
level to 50.
■ Position—Fine-tunes the horizontal and vertical positions of the
display.
■ Zoom—Magnifies an image up to a factor of 32 on the
projection screen (zooms in to a specific area on the screen, and
pans left, right, up, and down).
■ Keystone—Adjusts image distortion at the top and bottom
widths of the screen caused by tilting the projector.
■ Picture—Adjusts the gamma value or degree of contrast of
darkness or light for the projected image.