Coleman 5600 - Manual (Page 13)

Ц Ц Fasten the Firebox to the
Grill Cart.
NOTE: In Fig. 8-A and 8-B, the
Cart Spacer is not illustrated.
Step
8
13
8-A
Hardware shown actual size
(TN)
M6 x 15mm Screw
(4) Qty.
(DY)
M6 Flat Washer
(4) Qty.
Flange on Right
Side Panel
Flange on
Firebox
Firebox
TN (x2)
DY (x2)
8-B
8-A. Lower the Firebox until it is supported by
the flanges on the Right and Left Side
Panels.
Ц Ц LOOSELY fasten the Firebox to the
Right Side Panel with two Flat Washers
(DY) and two Screws (TN) as shown in
Fig. 8-A.
Ц Ц NOTE: You will tighten these screws
LATER (during Step 8-B), after the left
side of the Firebox is attached to the
Grill Cart (this helps with alignment).
8-B. Fasten the left side of the Firebox to the
Grill Cart with two Flat Washers (DY)
and two Screws (TN).
Ц Ц Tighten all fasteners.
View of Grill from Rear
DY (x2)
TN (x2)