Clarion DXZ946MP - Manual (Page 13)

DXZ946MP
13
English
Switching the operation mode
There are 2 basic operation modes: standard
operation and simple operation.
1. In the main display screen, touch and hold
the left of the display for 1 second or longer.
The operation mode is switched.
BAND
B
MODE
98.10MHz
SIMPLE MODE
In the simple operation, the operations of
touching
or in the radio mode or
CD mode main display screen are not required,
and this unit can be used by performing simple
operation.
Note, however, that the following operations are
not available in the simple operation.
• Preset tuning, folder selection, disc selection,
and other operations that involve touching
on the right of the display
• Display switching operations (cf. page 13)
• Title display switching operations (cf. page 14)
• Operations for displaying title entry screens.
In screens (e.g. list display, adjust mode, etc.)
other than the main display, there is no
difference between the standard operation
and the simple operation.
Descriptions given in this manual are mainly for
the standard operation. For descriptions for
operations in the simple operation, refer to the
descriptions for the screen displays in the radio
mode or the CD mode.
Basic Operations
Switching the display
1. Touch the center of the display.
Each time you touch the display, it changes
as follows:
FM1
BAND
B
MODE
3 4 2
98.10MHz
USER
FM1
BAND
B
MODE
3 4 2
98.10MHz
S/A SCAN
FM1
BAND
B
MODE
3 4 2
98.10MHz
1 0 0 5 a m 1 0 0 5 a m
Screen saver
When the screen saver function is set to “ON”,
and you do not operate this unit for about 30
seconds, the screen saver will be displayed. For
details, see page 36.
Title display
Spectrum Analyzer display
Time display