Clarion DXZ946MP - Manual (Page 18)

18
DXZ946MP
English
3. Touch on the ON/OFF display.
The position effect is toggled ON/OFF.
BASIC
B / U
BU
RTN
3 OFF
FRONT
POSITION MODE
When the position effect is set to “OFF”, the
position setting is not reflected on the music
source. This ends the position setting. Press
the [SOUND] button to return to the original
mode.
4. Touch B/U to select “BASIC”.
BASIC
B / U
BU
RTN
3 ON
FRONT
POSITION MODE
Each touch of B/U toggles between “BASIC”
and “USER”.
5. Touch on the position basic menu No.
to select the position basic menu.
Position basic menu
6. Press the [SOUND] button to return to the
original mode.
Adjusting/storing positions
(user memory)
With user memory, pin-point setting of speakers
is enabled so that the same audio effect can be
obtained from each speaker up to all listeners
based upon the position basic menu. Up to 5
adjustment setups can be stored to user
memory.
T-ALIGN (time alignment):
The distance from the listener up to each
speaker can be entered in 2.3 cm steps, and the
time that the sound reaches the listener from
each speaker can be adjusted.
SP GAIN (speaker gain):
Adjusts the speaker output level. Adjust so that
the volumes that are output from each speaker
are all the same.
AC-Processor III Operations
1. Press the [SOUND] button.
2. Touch POSITION.
3. Touch on the ON/OFF display.
The position effect is toggled ON/OFF.
4. Touch B/U to select “BASIC” or “USER”.
5. Touch on the right of the display to
select the menu that is used as the menu for
adjustment.
6. Press the [A] button.
7. Touch on the left of the display to
select “T-ALIGN” or “SP GAIN”.
8. Touch on the center of the display to
select each adjustment item.
Each touch of
switches the
adjustment items as follows:
Adjustment items
FRONT L SP (front left speaker)
FRONT R SP (front right speaker)
REAR L SP (rear left speaker)
REAR R SP (rear right speaker)
(when “SP-SETTING” is set to
“CTR+SW”)
SUB-WOOFER (sub-woofer)* 1
(when “SP-SETTING” is set to
“SW
L + SW R ”)
SUB-W L (sub-woofer Lch)* 1
SUB-W R (sub-woofer Rch)* 2
* 1 This is displayed only when “SUB-
WOOFER” under “SOUND” in the adjust
mode is set to “ON”.
* 2 This is displayed only when “SUB-
WOOFER” under “SOUND” in the adjust
mode is set to “ON”, and “T-ALIGN” is
selected at step 7.
9. Touch on the right of the display and
adjust the item as desired.
RTN
POSITION EDIT
FRONT L SP 085 . 1cm
T-ALIGN
∗
“T-ALIGN” can be adjusted within the
range 0 cm to 501.4 cm in 2.3 cm steps.
∗
“SP GAIN” can be adjusted within the
range -20dB to 0dB.
No. Display Name Seat Position
1 FRONT-L Front left seat
2 FRONT-R Front right seat
3 FRONT Front seats
4 REAR Rear seats
5 FULL SEAT All seats