Casio EXILIM EX-ZR20 - Manual (Page 152)

152
Using the Camera with a Computer
5.
Double-click the camera’s drive icon.
The camera’s back lamp will light green or orange at this time. In this mode, your
Macintosh recognizes the memory card loaded in the camera (or the camera’s
built-in memory if it does not have a memory card loaded) as a drive. The
appearance of the drive icon depends on the Mac OS version you are using.
6.
Drag the “DCIM” folder to the folder to which you want to copy it.
7.
After the copy operation is complete, drag the drive icon to Trash.
8.
Disconnect the camera from the computer.
After confirming that the back lamp is not flashing red, disconnect the USB cable.
.
To view copied images
1.
Double-click the camera’s drive icon.
2.
Double-click the “DCIM” folder to open it.
3.
Double-click the folder that contains the images you want to view.
4.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 155.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually display the component
images in the CS group. A CS group cannot be viewed as a CS image on a
computer.