Casio EXILIM EX-ZR20 - Manual (Page 77)

77
Using BEST SHOT
NOTE
• The current “Zoom (SR)” (page 55) setting is ignored when shooting with this
function.
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• The desired background blur effect may not be attained if the camera or subject
moves during shooting.
• Depending on the shooting environment, image composition, and subject, this
BEST SHOT scene may not be able to produce the desired result.
• If the camera determines that it is unable to blur the background of an image for
some reason, it will display the message “Blur processing failed.”. Note, however,
that the image will be saved, even if background blurring is not possible.
With this feature, a number of images are shot and then combined to produce an
image with a super-wide angle of view that exceeds the widest angle of view possible
with the lens. Converted to 35 mm equivalents, the focal distances available with this
feature enable shooting with approximate angles of view of 15 mm and 19 mm.
1.
In the REC mode, press [BS] (BEST SHOT).
2.
Select “Wide Shot” and then press [SET].
3.
Press [SET] and then use [8] and [2] to select the width setting, which
is the second Control Panel setting from the top.
4.
Use [4] and [6] to select the width setting (angle of view) you want and
then press [SET].
There are two settings available: “Wide 1 (19mm)” and “Wide 2 (15mm)”.
“15 mm” shoots a wider area than “19 mm”.
Shooting with a Super Wide Angle of View (Wide Shot)
25 mm (lens widest angle) Wide 1 (19mm) Wide 2 (15mm)