Cisco 1800 Series - Manual (Page 4)

11-4
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
OL-5876-03
Chapter 11 Installing and Upgrading Internal Modules in Cisco 1800 Series Routers (Modular)
Modules Internal to the Cisco 1841 Router
Figure 11-3 Removing the Cover of the Cisco 1841 Router
Step 7 Place the router bottom on an antistatic mat, and begin installing memory.
Locating Modules
Figure 11-4 shows where the connector for the SODIMM or the AIM is located on the Cisco 1841
motherboard.
1 Slide cover back from router chassis 2 Rotate cover to remove from router chassis
103165
1
2