Before operating getting started, Stop/clear, Heating without food – Sharp R-770B User Manual

Page 46

Advertising
background image

E – 6

* This oven is preset with the OPERATION GUIDE in Russian.

To assist you in programming your oven, the operation guide will appear in the display.
In this manual, the display of operation guide is abbreviated.

* You can get operation guide in Russian, English or Malay.

To change the language, see page E-33.

Before Operating

Getting Started

Step

Procedure

Pad Order

Display

Plug the oven into a power point.
Ensure the oven door is closed.

Stop/Clear

Use the STOP/CLEAR pad to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.

Press the STOP/CLEAR pad twice.

To Cancel a Programme During Cooking

Some smoke and odor may occur for a while at the beginning of GRILL, GRILL MIX, PIZZA, CRISPY
SNACK or AUTO GRILL mode, but the oven is not out of order.

To remove the cause of the smoke and odor, operate the oven without food for 20 min. on Grill using
top and bottom heaters before the first use and after cleaning.

Heating without Food

Step

Procedure

Pad Order

Display

Ensure that no food is in the oven.
Press the GRILL pad 3 times.

Press the INSTANT COOK/START pad.

IMPORTANT:
During this operation, some smoke and
odor will occur. Therefore open the win-
dows or run the ventillation fan in the
room.

COOK is flashing.

Open the door to cool the oven cavity.
WARNING:
The oven door, outer cabinet and oven cavity will become hot and pay attention to avoid burn
when cooling the oven.

The timer will begin to count
down. When it reaches zero,
all indicators will go out and
audible signal will sound.

x 3

0

0

0

2

GRILL

INSTANT COOK/

/

START

COOK

ghbujnjd

COOK

ghbujnjd

Enter the heating time (20 min.).

3

4

1

1

2

Press the STOP/CLEAR pad so that the
oven beeps.

Only the dots will remain.

STOP/

/

CLEAR

2

Advertising