HP 9200c - Manual (Page 48)

Error message Explanation or action needed
68.x Storage Error Settings Changed An error occurred in the device nonvolatile
memory (NVRAM), and one or more device
settings have been reset to their factory default.
Sending can continue, but some unexpected
functions might result because the error
occurred in permanent storage.
Pressing S
TART
should clear the message. If this
message persists, contact your system
administrator.
68.x Permanent Storage Full The printer NVRAM is full. Some settings saved
in the NVRAM might have been reset to the
factory defaults.
Sending can continue, but some unexpected
functions might result because the error
occurred in permanent storage.
Pressing S
TART
should clear the message. If this
message persists, contact your system
administrator.
68.x Permanent Storage Write Fail The printer NVRAM is failing to write.
Sending can continue, but there might be some
unexpected functions because the error
occurred in permanent storage.
Pressing S TART should clear the message. If this
message persists, contact your system
administrator.
42 Chapter 4 Problem solving ENWW