Cleaning the printhead nozzles, Cleaning the exterior of the printer – Dell V525w All In One Wireless Inkjet Printer User Manual

Page 118

Advertising
background image

Cleaning the printhead nozzles

If you have not been using the printer for a long period, then you may need to clean the printhead nozzles to improve
the quality of your prints. Keep your printer plugged to a properly grounded, working electrical outlet to allow it to
perform automatic maintenance cycles.

Notes:

•

Cleaning the printhead nozzles uses ink, so clean them only when necessary.

•

Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.

•

If the ink levels are too low, you must replace the ink cartridges before you can clean the printhead nozzles.

1

Load paper.

2

From the printer control panel, navigate to:

> Setup > > Maintenance >

3

Press the up or down arrow button to scroll to Clean Printhead or Deep Clean Printhead, and then
press .

A cleaning page prints.

Cleaning the exterior of the printer

1

Make sure that the printer is turned off and unplugged from the wall outlet.

CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.

2

Remove all paper from the printer.

3

Dampen a clean, lint

‑free cloth with water.

Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.

4

Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper
exit tray.

Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.

5

Make sure the printer is dry before beginning a new print job.

Maintaining the printer

118

Advertising