Dell POWERVAULT MD3620I User Manual
Page 28
Figure 18. Manually Adding a Host Dialog
NOTE: The Configure ESX Host to Storage Array wizard does not detect how the fibre channel switch fabric is
zoned. Suggested configurations are based on HBA ports detected and may require the fabric to be rezoned
based on your specific environment cabling.
You cannot rename or remove existing configured hosts or host groups. Existing host and host group configuration
changes must be performed from MD Storage Manager. A real-time summary page is displayed showing the status
of the changes being applied to the selected storage array. Once the changes are applied, select Restart to repeat
the configuration process on another storage array, or select Close to close the configuration wizard.
Figure 19. Apply Changes to Storage Array
28