Dell PowerVault 122T LTO (Autoloader) - Manual (Page 40)

Back to Contents Page
Technical Specifications: Dell(tm) PowerVault(tm) 122T LTO-2 Autoloader User's
Guide
Physical Specifications
Autoloader Specifications
Autoloader Environmental Specifications
Tape Drive Specifications
Physical Specifications
Autoloader Specifications
Autoloader Environmental Specifications
Tape Drive Specifications
LTO-2 Drive Specifications
Characteristic Product Alone Packaged
Height 8.4 cm (3.34 in) 20.5 cm (8.0 in)
Width 41.9 cm (16.5 in) 60 cm (23.6 in)
Depth 60.9 cm (24 in) (Approximately 65 cm (25.6 in) with Bar Code Reader) 74.3 cm (29.2 in)
Weight 10 kg (22 lb) 13 kg (29 lb)
Characteristic Specification
Maximum storage capacity Native: 1.6 TB
Compressed: 3.2 TB (assuming 2:1 compression ratio)
Maximum data transfer rate Native: 35 MB/s
Compressed: 70 MB/s (assuming 2:1 compression ratio)
Drive type 1 IBM LTO Ultrium 2 drive
Number of slots 8
MCBF 250,000 hours
Interface LVD ultra wide SCSI-2, 16 bits wide, 68-pin HD connector
Characteristic Specification
Temperature/humidity
Operating 10° to 38°C (Wet bulb temp, 32°C max)
Non-operating -40° to 65°C (Wet bulb temp, 40°C max)
Recommended operating temperature 20° to 30°C (Wet bulb temp, 30°C max)
Temperature shock immunity - maximum rate of change 10°C per hour
Humidity
Operating 20% to 80% RH non-condensing
Non-operating 5% to 95% RH non-condensing
Altitude
Operating 0 to 4000 m
Non-operating 0 to 9144 m
Vibration (5- 500 Hz)
Maximum acceleration to operating 0.25g RMS (random)
Frequency range 500 Hz
Description (LTO-2)
Read/write transfer rate: maximum sustained Non-compressed mode: 35.0 MB/s
Compressed (2:1 typical): 70.0 MB/s
Burst transfer rate 160 MB/s
Average access time 49 seconds
Loading time to BOT
(for previously written tape) <15 seconds (average)
Unloading time from BOT <15 seconds (average)
MTBF 250,000 hours
Interface type Ultra-160 SCSI LVD