Removing the base cover, Procedure – Dell Inspiron 15 (7537, Mid 2013) User Manual
Page 10
10
| Removing
the
Base
Cover
Removing the Base Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Close the display, and turn the computer over.
2
Loosen the captive screws that secure the base cover to the palm-rest assembly.
3
Remove the screws that secure the base cover to the palm-rest assembly.
4
Using a plastic scribe, pry the base cover out of the bottom cover.
1
screws (2)
2
base cover
3
plastic scribe
4
captive screws (2)
1
4
2
3