Dell Inspiron 15 (7537, Mid 2013) - Manual (Page 35)

Removing the Thermal-Cooling Assembly | 35
Procedure
NOTE: The number of screws and the shape of the thermal-cooling assembly vary
for systems shipping with integrated graphics card.
1 Disconnect the fan cable from the system board.
2 In sequential order (indicated on the thermal-cooling assembly), loosen the captive
screws that secure the thermal-cooling assembly to the system board.
3 Lift the thermal-cooling assembly off the palm-rest assembly.
1 captive screws (5) 2 thermal-cooling assembly
3 fan cable
1
2
3