Removing the memory, Installing the memory, Removing the system fan – Dell Precision T1700 (Mid 2013) User Manual

Page 19

Advertising
background image

If memory modules with different speeds are installed, they operate at the speed of the slowest installed

memory modules.

Removing the Memory

1.

Follow the procedures in

Before Working Inside Your Computer

.

2.

Remove the cover.

3.

Press down on the memory retaining tabs on each side of the memory modules, and lift the memory modules out of

the connectors on the system board.

Installing the Memory

1.

Align the notch on the memory-card with the tab in the system-board connector.

2.

Press down on the memory module until the release tabs spring back to secure them in place.

3.

Install the cover.

4.

Follow the procedures in

After Working Inside Your Computer

.

Removing the System Fan

1.

Follow the procedures in

Before Working Inside Your Computer

.

2.

Remove
a) cover
b) optical drive
c) drive cage
d) front bezel

3.

Disconnect the system-fan cable from the system board.

19

Advertising