Osd warning messages – Dell S2309WFP Monitor User Manual
Page 20
OSD Warning Messages
Factory Reset
Back
Reset all OSD settings to the factory preset values.
Push
to go back to or exit the main menu.
When the monitor does not support a particular resolution mode you will see the following message :
or
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See
Monitor Specifications
for the Horizontal and Vertical frequency ranges addressable by this
monitor. The recommended mode is 1920 X 1080.
When monitor enters Power Save mode, the following message appears :
or
Activate the computer and wake up the monitor to gain access to the
If you push any button other than the power button one of the following messages will appear depending on the selected input:
VGA/DVI-D input