Dell S2309WFP Monitor - Manual (Page 8)

Electrical
Physical Characteristics
Environmental
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1920 x 1080 67.2 60.0 173.0 -/+
VESA, 1920 x 1080 66.6 59.9 138.5 +/-
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
impedance
Digital DVI-D TMDS, 600mV for each differential line, positive
polarity at 50 ohm input impedance
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
Inrush iso surge current
110 V: 30 A (Max.)
220 V: 60 A (Max.)
Connector type
l D-sub: blue connector
l DVI-D: white connector
Signal cable type
l D-sub: Detachable, Analog, 15pin, shipped attached to
the monitor
l DVI-D (Optional): Detachable, Digital, 24pin, shipped
detached from the monitor
Dimensions (with stand)
Height 401.33 mm (15.800 inches)
Width 554.50 mm (21.831 inches)
Depth 222.6 mm (8.764 inches)
Dimensions (without stand)
Height 331.90 mm (13.067 inches)
Width 554.50 mm (21.831 inches)
Depth 62.94 mm (2.478 inches)
Stand dimensions
Height 285 mm (11.22 inches)
Width 222.6 mm (8.764 inches)
Depth 222.6 mm (8.764 inches)
Weight
Weight with packaging 7.66 kg ( 16.89 lb)
Weight of Monitor and Stand Assembly 5.67 kg ( 12.50 lb)
Weight without stand assembly
(For wall mount or VESA mount considerations -
no cables)
4.53 kg ( 9.99 lb)
Weight of stand assembly 1.14 kg (2.51 lb)
Temperature
Operating 0° to 40° C (32° to 104°F)