Dell S2240T 21.5 Multi-Touch Monitor with LED - Manual (Page 21)

Setting Up the Monitor | 21
2 Setting Up the Monitor
Attaching the Stand
NOTE: The stand is attached when the monitor is shipped from the factory.
1 Attach the stand to the monitor.
a. Place the monitor on a soft cloth or cushion.
b. Pull the monitor stand arm upwards clear of the monitor.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions .
NOTE: The VGA/DVI cable can be purchased separately.
NOTE: Do not connect all cables to the computer at the same time.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
Connect the HDMI/DVI/VGA cable from your monitor to the computer.