Dell S2240T 21.5 Multi-Touch Monitor with LED User Manual
Page 32
32
| Operating
the
Monitor
Auto Adjust
Even though your computer recognizes your monitor on startup, the
Auto Adjustment function optimizes the display settings for use with
your particular setup.
Auto Adjustment allows the monitor to self-adjust to the incoming
video signal. After using Auto Adjustment, you can further tune your
monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls
under Display Settings.
NOTE:
In most cases, Auto Adjust produces the best image for your
configuration.
NOTE:
Auto Adjust option is only available when you are using the
analog (VGA) connector.
Input Source
Use the Input Source menu to select between the different video
signals that may be connected to your monitor.
Auto Select
Press
to select Auto Select, the monitor scans for available input
sources.
VGA
Select the VGA input when you are using the analog (VGA) connector.
Press
to select the VGA input source.
DVI-D
Select the DVI-D input when you are using the Digital (DVI) connector.
Press
to select the DVI input source.
HDMI
Select the HDMI input when you are using the HDMI connector. Press
to select the HDMI input source.