Display assembly, Display assembly hinge to base – Dell Inspiron 2000 User Manual
Page 27
Figure 6. Keyboard Bezel Removal
NOTICE: To avoid damaging the system board, you must remove the main battery before you service the computer.
NOTICE: To avoid damaging the microphone, do not put any objects into the microphone hole (see Figure 6).
1. Place the point of a paper clip, a very small flat-blade screwdriver, or a tool of similar size in the keyboard bezel hole and carefully push down
(see Figure 6).
2. While pushing down, slide the keyboard bezel to the left until it releases.
3. Lift the keyboard bezel.
Display Assembly
Figure 7. Display Assembly Removal
NOTICE: To avoid damaging the system board, you must remove the battery before you service the computer.
1. Remove the
.
2. Close the display.
1 Microphone hole
2 Keyboard bezel release hole
3 Keyboard bezel
1 Display assembly
2 Right hinge cover
3 M2 x 5-mm screws (2)
4 M2 x 4-mm screws (2)
5 LCD flex cable
6 LCD flex cable hold-down clip
7 Left hinge cover
8 M2 x 8.5-mm screw