Canon HD Camcorder VIXIA HG20 - Manual (Page 25)

25
1
Press the tab in the direction of
the arrow and pull out the battery
holder.
2
Place the lithium button battery
with the + side facing up.
3 Insert the battery holder.
Point the wireless controller at the
camcorder’s remote sensor when
you press the buttons.
You can rotate the LCD panel 180
degrees to use the wireless controller
from the front of the camcorder.
NOTES
• The wireless controller may not work
properly when the remote sensor is
situated under strong light sources or
direct sunlight.
• If the wireless controller does not work,
check that [Wireless Remote
Control] is not set to [ Off ]
( 98). Otherwise, replace the battery.
Accessories
Fasten the grip belt.
Adjust the grip belt so that you can reach
the zoom lever with your index finger, and
the
button with your thumb.
Pass the ends of the shoulder strap
through the strap mount on the grip
belt and adjust the length of the
strap.
T
O USE THE WIRELESS CONTROLLER
T O ATTACH A SHOULDER STRAP
Start/Stop