Dell Vostro 2520 (Mid 2012) - Manual (Page 31)

6. Lift up the display assembly and remove it from the computer.
Installing the Display Assembly
1. Insert the display assembly hinges into their holders.
2. Install the screw that secure both the hinges in place.
3. Connect the LVDS cable to the system board.
4. Align the WLAN antennae routing cable to its holder and connect the antennae to the WLAN card.
5. Connect the USB board cable.
6. Install:
a) palmrest
b) keyboard
c) hinge cover
d) battery
7. Follow the procedures in After Working Inside Your Computer .
Removing the Power-Connector Port and Bracket
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a) battery
b) hinge cover
c) keyboard
31