Dell Vostro 2520 (Mid 2012) - Manual (Page 33)

Installing the Power-Connector Port and Bracket
1. Insert the power-connector port and the bracket into its compartment.
2. Align the bracket and tighten the screw that secures the bracket and power connector.
3. Connect the power-connector cable to the system board.
4. Install:
a) display assembly
b) palmrest
c) keyboard
d) hinge cover
e) battery
5. Follow the procedures in After Working Inside Your Computer .
Removing the Display Bezel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery.
3. Starting from the bottom, pry the bezel inside out from the display assembly and work your way to the right and the
left corners of the display bezel.
4. Remove the bezel from the display assembly once all the tabs have been loosened.
33