Dell S1909WFP Monitor - Manual (Page 27)

After you have completed connecting the DVI/VGA cable, follow the procedure below to complete your monitor setup:
1. Plug the power cables for your computer and monitor into a nearby outlet.
2. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
Solving Problems .
3. Use the cable management slot on the monitor stand to organize the cables.
Attaching the Soundbar (optional)
Removing the Base
NOTE: Not all monitor models ship with a DVI cable. To purchase a DVI cable Contact Dell .
NOTE: The Graphics are used for the purpose of illustration only. Appearance of the the computer may vary.
1. Working from the rear of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector.
4. Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
NOTICE: Do not use with any device other than the Dell Soundbar