Dell S1909WFP Monitor - Manual (Page 8)

Electrical
Physical Characteristics
Environmental
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
impedance
Digital DVI-D TMDS, 600mV for each differential line, positive
polarity at 50 ohm input impedance
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
Inrush iso surge current
120 V: 30 A (Max.)
240 V: 60 A (Max.)
Connector type
l D-sub: blue connector
l DVI-D: white connector
Signal cable type
l D-sub: Detachable, Analog, 15pin, shipped attached to
the monitor
l DVI-D (optional): Detachable, Digital, 24pin, shipped
detached from the monitor
Dimensions (with stand)
Height 344.33 mm (13.56 inches)
Width 453.25 mm (17.86 inches)
Depth 204.83 mm (8.06 inches)
Dimensions (without stand)
Height 273.85 mm (10.78 inches)
Width 453.75 mm (17.86 inches)
Depth 57.57 mm (2.27 inches)
Stand dimensions
Height 129.10 mm (5.08 inches)
Width 204.83 mm (8.06 inches)
Depth 204.83 mm (8.06 inches)
Weight
Weight with packaging 5.23 kg ( 11.51 lb)
Weight with stand assembly and cables 4.06 kg ( 8.94 lb)
Weight without stand assembly
(For wall mount or VESA mount considerations -
no cables)
3.28 kg ( 7.23 lb)
Weight of stand assembly 0.31 kg (0.67 lb)
Temperature
Operating 0° to 50° C (32° to 122°F)
Non-operating
Storage: -20° to 60° C (-4° to 140° F)
Shipping: -20° to 60° C (-4° to 140° F)
Humidity
Operating 5% to 90% (non-condensing)
Non-operating
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
Altitude
Operating 3,048 m (10,000 ft) max
Non-operating 9,144 m (30,000 ft) max