Dell Inspiron 1720 (Mid 2007) - Manual (Page 157)

Adding and Replacing Parts
157
Replacing a WLAN Card
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
NOTICE:
To avoid damage to the WLAN card, never place cables under the card.
1 Insert the
WLAN card connector at a 45-degree angle into the system
board connector labeled "WLAN".
2 Press the other end of the
WLAN card down into the securing tabs until
the card clicks into place.
1 metal securing tabs (2) 2 WLAN card
1
2