Dell OptiPlex Gxi - Manual (Page 67)

Installing System Board Options 6-1
Chapter 6
Installing System Board Options
T
his chapter describes how to install the following
options:
• Industry-Standard Architecture (ISA) and Peripheral
Component Interconnect (PCI) expansion cards
• System memory
• Microprocessor
This chapter also includes instructions for updating the
NIC daughter card and replacing the system battery, if
necessary.
Use Figure 6-1 to locate the system board features.
Figure 6-1. System Board Features
video connector
(MONITOR)
parallel/serial port
connectors (stacked)
(PARALLEL/SERIAL)
diskette/tape drive
interface connector
(DSKT)
riser board connector (RISER)
secondary EIDE interface
connector (IDE2)
system board
jumpers
microprocessor fan
connector (FAN)
battery socket
(BATTERY)
control panel
connector (PANEL)
3.3-V power input connector
(POWER2)
keyboard/mouse
connectors (stacked)
(KYBD/MOUSE)
main power input
connector (POWER1)
microprocessor socket
(MICROPROCESSOR)
(pin-1 corner)
DIMM sockets (4)
(DIMM_A–DIMM_D)
USB connectors
(USB)
bottom of computer
primary EIDE interface
connector (IDE1)
cache-memory card
connector (CACHE)
line-in jack (LINE-IN)
line-out jack (LINE-OUT)
microphone jack (MIC)
CD-ROM drive audio cable
connector (CD_IN)
NIC daughter board
connector (NETWORK)