Figure 1, System with cables installed, Figure 2 – Dell PowerEdge Rack Enclosure 4220 User Manual
Page 5: Figure 3
Advertising
Cable Routing Procedures for the Dell PowerEdge T320 & T420 Systems
5
System with cables installed
Figure 1.
1.2. Routing the power cables through the strain reliefs
After you have installed the tray and cables, route the power cable(s) through the strain relief(s)
located on the power supply handle(s) as shown in Figures 2 & 3.
Routing power cables through the strain reliefs on hot swap power supplies
Figure 2.
Routing the power cable through the strain relief on a fixed power supply
Figure 3.
Advertising
This manual is related to the following products: