Dell J740 Personal Inkjet Printer - Manual (Page 11)

Using the printer
Loading paper
Loading paper
To load most types of paper:
1. Place the paper against the right side of the paper support with the print side facing you and the top of the paper feeding into the paper support.
2. Squeeze and slide the paper guide to the left edge of the paper.
To load other paper types, follow these guidelines.
NOTE: Do not force paper into the printer.
NOTE: To avoid smearing ink, remove each transparency or photo from the paper exit tray before the next one exits the printer. Transparencies and
photos may require up to 15 minutes to dry.
Load up to: Make sure:
150 sheets of plain paper The paper is designed for use with inkjet printers.
l The envelopes are loaded vertically against the right side of the paper support.
l The stamp location is in the upper left corner.
l The envelopes are designed for use with inkjet printers.
l You squeeze and slide the paper guide to the left edge of the envelope.
10 envelopes
25 sheets of labels The labels are designed for use with inkjet printers.
50 sheets of card stock l The card stock is designed for use with inkjet printers.
l The thickness does not exceed 0.025 inches.
10 greeting cards, index cards, postcards, or photo cards The cards are loaded vertically against the right side of the paper support.
50 sheets of coated, photo, or glossy paper The glossy or coated side faces you.
10 transparencies l The transparencies are designed for use with inkjet printers.
l The rough side faces you.
100 sheets of custom size paper Your paper size fits within these dimensions:
Width
¡ 76 to 216 mm
¡ 3.0 to 8.5 in.
Length
¡ 127 to 432 mm
¡ 5.0 to 17.0 in.
10 iron-on transfers l You follow the loading instructions on the iron-on packaging.