Installing the base cover, Removing the ssd card – Dell Latitude E7250/7250 (Late 2014) User Manual
Page 11
Advertising
Installing the Base Cover
1.
Place the base cover to align with the screw holes correctly on the computer.
2. Tighten the screws to secure the base cover to the computer.
3. Install
.
After Working Inside Your computer
Removing the SSD Card
1.
Before Working Inside Your Computer
2. Remove:
a.
b.
3. Perform the following steps as shown in the illustration:
a. Remove the screws that secure the SSD card to the computer [1].
b. Lift and remove the SSD card from the computer [2].
11
Advertising