Installing the speakers, Removing the display-hinge cover – Dell Latitude E7250/7250 (Late 2014) User Manual
Page 20
Advertising
Installing the Speakers
1.
Align the speakers to their original position and tighten the screws to secure the speakers to the
computer.
2. Route the speaker cable on the computer and connect it to the system board.
3. Install:
a.
b.
c.
d.
e.
f.
g.
After Working Inside Your computer
Removing the Display-Hinge Cover
1.
Before Working Inside Your Computer
2. Remove:
a.
b.
c.
d.
e.
3. Remove the screws that secure the display-hinge cover to the computer.
4. Perform the following steps as shown in the illustration:
a. Remove the screws that secure hinge to the system board [1].
b. Lift the Hinge from the computer [2].
20
Advertising