Dell Precision M6600 (Mid 2011) - Manual (Page 38)

7. Remove the hard drive bracket from the hard drive.
Installing The Secondary Hard Drive
1. Attach the hard drive bracket to the hard drive.
2. Tighten the hard drive bracket screws. Ensure that the bracket is properly
aligned and holds the hard drive.
3. Slide the hard drive into its compartment towards the connector on system
board.
4. Tighten the screws securing the hard drive in place.
5. Install the
base cover .
6. Install the battery .
7. Follow the procedures in After working inside your computer .
38