Dell Precision M6600 (Mid 2011) - Manual (Page 86)

Installing The System Board
1. Align the system board to the port connectors on the rear of the chassis
and place the system board in the computer.
2. Tighten the screws securing the system board in place.
3. Connect the DC-in cable.
4. Connect the wireless switch.
5. Connect the coin-cell battery on the bottom side of the computer.
6. Install the
display assembly .
7. Install the Input/Output board .
8. Install the graphics card .
9. Install the graphics card heatsink .
10. Install the processor .
11. Install the CPU heatsink .
12. Install the palm rest .
13. Install the CPU fan .
14. Install the secondary memory .
15. Install the primary memory .
16. Install the WWAN card .
17. Install the WLAN card .
18. Install the secondary hard drive .
19. Install the primary hard drive .
20. Install the optical drive .
21. Install the keyboard .
22. Install the keyboard trim .
23. Install the base cover .
24. Install the battery .
25. Follow the procedures in After Working Inside Your Computer .
86