Dell PowerVault 110T LTO3 - Manual (Page 18)

Back to Contents Page
Specifications: Dell TM PowerVault TM 110T LTO-3 Tape Drive User's Guide
General
External Drive
Internal Drive
NOTE: These specifications are provided by the manufacturer for information purposes only and do not constitute an extension of Dell's warranty to
you. Dell's warranty is contained in the documentation for your system.
General
Manufacturer Manufactured for Dell
Model Number DELL PowerVault 110T LTO-3 Tape Drive: LTO Internal; LTO
External
Interface Type Ultra160 Low Voltage Differential (LVD) SCSI bus
External Drive
Physical Specifications
Width 24.9 cm (9.8 in)
Length 29.0 cm (11.42 in)
Height 12.5 cm (4.92 in)
Weight 6.45 kg (14.2 lb)
Power Requirements
AC line voltage 100–240 VAC
Line frequency 50–60 Hz, auto-ranging
Line current at 100 VAC 0.58 A
Line current at 240 VAC 0.24 A
Performance
Interface Ultra160 LVD SCSI
Recording format LTO Ultrium Generation 3
Media LTO Ultrium
Capacity 400 GB (native) 800 GB (compressed, assuming 2:1
compression)
Data transfer rate Native 80 MB/sec, at maximum compression 135 MB/sec
Burst transfer rate up to 160 MB/sec
Operating Limits
Temperature 10° to 35°C (50° to 95°F)
Humidity 20% to 80% relative humidity (noncondensing)
Maximum wet bulb temperature 23°C (73.4°F)
Maximum altitude 3048 m (10,000 ft)
Nonoperating Limits (Storage or Shipping)
Temperature -40° to 65°C (-40° to 149°F)
Humidity 5% to 95% relative humidity (noncondensing)
Maximum wet bulb temperature 23°C (73.4°F)