Attaching the soundbar (optional), Removing the stand, Wall mounting (optional) – Dell E2210 Monitor User Manual

Page 29: Attaching the soundbar(optional)

Advertising
background image

to organize all cables as shown above.

Attaching the Soundbar(optional)

To attach the Soundbar:

Removing the Stand

To remove the stand:

1.

Rotate the stand to allow access to the stand release button.

2.

Press and hold the stand release button.

3.

Lift the stand up and away from the monitor.

Wall Mounting (Optional)

CAUTION:

Do not use with any device other than Dell Soundbar. 

1.

Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.

2.

Slide the Soundbar to the left until it snaps into place.

3. 

Connect the Soundbar with the power brick.

4. 

Plug the power cable of the brick to a nearby power outlet.

5.

Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.

NOTE:

To prevent scratches on the LCD screen while removing the stand,

 

ensure that the monitor is placed on a clean surface.

Advertising