Connecting to the san i/o module using web tools – Dell PowerEdge M805 User Manual

Page 13

Advertising
background image

4424 QuickStart Guide

15 of 16

Publication Number: 53-1000572-01

3. Enable the SAN I/O Module using Web Tools or CLI. When the SAN I/O Module is enabled, the newly-added POD

ports are also enabled.

Connecting to the SAN I/O Module Using Web Tools

Complete the following steps to connect to the SAN I/O Module using Web Tools.

1. On the management console, open a Web browser such as Internet Explorer.

The Web browser must be connected to the same network as the SAN I/O Module.

2. Enter the IP address of the SAN I/O Module in the address field and press Enter.

For more information about using Web Tools, see the Web Tools Administrator’s Guide.

Advertising