Speakers, Removing the speakers, Replacing the speakers – Dell Inspiron 11z (1120, Mid 2010) User Manual
Page 49
Back to Contents Page
Speakers
Dell™ Inspiron™ 1121 Service Manual
Removing the Speakers
1.
Follow the instructions in
Before You Begin
.
2.
Remove the system board (see
Removing the System Board
).
3.
Disconnect the speaker cable from the connector on the audio board.
4.
Remove the four screws (two on each speaker) that secure the speakers to the computer base.
5.
Lift the speakers off the computer base.
Replacing the Speakers
1.
Follow the instructions in
Before You Begin
.
2.
Place the speakers in the computer base.
3.
Replace the four screws (two on each speaker) that secure the speakers to the computer base.
4.
Connect the speaker cable to the connector on the audio board.
5.
Replace the system board (see
Replacing the System Board
).
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
speakers (2)
2
screws (4)
3
speaker cable connector
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.